Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Apply 2-component body adhesive -DA 180 A00 A2- to bond‐
ing area using double cartridge gun -VAS 6453- .
Welding in
– Weld in at outer separating cuts using shielded arc welding
equipment : SG continuous seam.
– Weld in lower side member using shielded arc welding equip‐
ment : SG continuous seam (staggered - with gaps).
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
6. Outer side member - Renewal 89
To Next Page
Loading...
