EasyManua.ls Logo

Audi Q3 2017 - Notes about T Echnical Dat; Dimensions; Capacities

Audi Q3 2017
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Te c h nical data
A WARNING
- The actual Gross Axle Weight Rating at the
front and rear axles should not exceed the
permissible weights, and their comb inat ion
must not exceed the Gross Veh icle Weight
Rating .
- Exceeding pe rm iss ible weight ratings can
resu lt in vehicle damage, acc idents a nd per-
so nal injury.
([) Note
- The vehicle capacity weight figures app ly
when the load is distributed evenly in the
vehicle (passe ngers and luggage). When
transporting a heavy load in the lugg age
compartment, carry the load as near to t he
rear axle as possible so that the vehicle's
handling is not impaire d.
- Do not exceed the maximum permissib le
axle loads or the maximum gross vehicle
Dimensions
we ight . Always remember that the vehi cle's
hand ling will be affected by the extra load.
Therefore, adjust your speed according ly.
- Always observe local regulations .
Notes about technical
data
The values may differ for some markets depend-
ing on equ ipment installed in certain markets
and the measur ing methods .
Please note that the specifications listed in the
vehicle documentat ion a lways take precedence.
(D Tips
Missing technical data was not ava ilable at
the time of pr int ing.
Length (in (mm)) Width (in (mm )) Width across the Height at curb
Q3 172.8 (4,388)
When driving on poor roads, by curbs and on
steep ramps, make s ure that low-hanging com-
ponents such as the spo iler and exha ust system
Capacities
Fuel tank
Winds hield and headlight washe r system
216
mirrors (in (mm )) weight (in (mm))
72 .0 (1,831) 79.4 (2,019) 62.5 (1,590)
do not come into contact with these or they cou ld
be damaged. This especially applies to vehicles
with a full load.
Approximate capaci-
ties
16.9 (64.0) qt (l)
4 .8 (4 .5) qt (l)

Table of Contents

Related product manuals