Driver information system
• Press and hold the I RESET I button @ for at
least one second . All values in the selected on-
board computer or in the efficiency program
are reset to zero.
Operating using the multifunction steering
wheel
Applies to: vehicles with driver information system and mul ti -
fun ct ion st eeri ng wheel
Fig. 8 Mult ifunction steering wheel: operat i ng the driver
info rmation system
The tab @ ¢ page 19, fig. 6 appears once you
press a button on the mult ifunction steering
wheel.
Operating
,-..
~
N
0
Cl
<t
m
• Switch the ignition on. The last select function
is disp layed.
• To switch between the tabs, press the button
(D to the left or right ~ fig . 8.
• To access additional information below or
above, turn the thumbwheel @ down or up.
• To confirm a selection, press t he t humbwheel
@.
Opening Car functions
• Select the first tab with the button (D.
• Press the button @ . The Car functions menu is
displayed .
• To se lect a menu item, turn and press the
thu mbwheel @ .
• To se lect a function programmed to a steering
wheel button, press the button
@.
Resetting values to zero
• In the Car functions me nu, select On-board
computer or Efficiency program.
20
• Select a value in the desired trip computer or in
the efficiency program.
• To reset the values in a memory, press and hold
the thumbwheel @ for one second.
Assigning a function to a programmable
steering wheel button
• Select the ICARI button> (Car) Systems* con-
trol button >
Vehicle settings > Steering wheel
button .
Recalling indicator lights and messages
• Select the D tab.
The
D tab is on ly visible when there is at least
one indicator light or message displayed . Other
folders are only visible if the applicable system is
switched on .
On-board computer
App lies to: vehicles with on-board comp uter
Fig. 9 Display: on-board computer memory level 1
Operating with the windshield wiper lever*
• Press the I RESET I button @ ¢ page 19, fig. 7
repeatedly until the on-board computer ap-
pears in the disp lay.
• To access add itiona l content, press the button
®·
Operating with the multifunction steering
wheel*
• Open Car functions and select the On-board
computer
menu item
~
page 20.
• To access additiona l content, turn the t humb-
wheel @ ~
page 20, fig. 8 . ""
To Next Page
Loading...
