EasyManua.ls Logo

Audi Q3 2017 - Page 71

Audi Q3 2017
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00
or in the 5 sport mode. The instrument cluster
display shows the selected driving mode.
In the
normal mode D, the transmission auto-
matically selects the suitable gear ratio.
It de-
pends on engine load, vehicle speed and driving
style.
Select the sport mode 5 for sporty driving. The
vehicle makes full use of the engine's power.
Shifting may become noticeable when accelerat-
ing.
To move from selector lever position N to D, you
must press the brake pedal and the vehicle must
be traveling less than 1 mph (2 km/h) or be sta-
tionary ¢ &..
A WARNING
Read and follow all WARNINGS ¢ &. in Driv-
ing tips on page
70.
@ Note
Coasting downhill with the transmission in N
and the engine not running will result in dam-
age to the automatic transmission and possi-
bly the catalytic converter.
(D Tips
- If you accidentally select N while driving,
take your foot off the accelerator pedal and
wait for the engine to slow down to idle be-
fore selecting Dor 5.
- If there is a power failure, the selector lever
will not move out of the P position. The
emergency release can be used if this hap-
pens ¢
page 72.
Driving tips
Starting the engine
.. The selector lever must be in the P or the N po-
sition.
Starting from a stop
.. Press and hold the brake pedal.
~
.. Press and hold the interlock button in these-
"'
~
lector lever handle, select the desired selector
....
0
0
:::,
00
Driving
lever position such as D ¢ page 68 and release
the lock button.
.. Wait a moment until the transmission shifts.
You will notice a slight movement when the
gear engages.
.. Release the brake pedal and press the accelera-
tor pedal ¢ _& .
Stopping temporarily
.. Press the brake pedal to stop the vehicle, for
example at a traffic light. Do not press the ac-
celerator pedal when doing t his.
.. To prevent the vehicle from rolling when you
start driving, set the parking brake when stop-
ping on steep inclines ¢ ,& .
.. The parking brake will release automatically
and the vehicle will start moving once you press
the accelerator pedal.
Stopping/parking
If the selector lever is not in the P position when
you open the driver's door, the vehicle could roll.
In vehicles with a convenience key*, the message
Shift to P and turn off ignition, or vehicle can
roll away
appears.
.. Press and hold the brake pedal¢ _& .
.. Set the parking brake .
.. Select the P selector lever position.
Stopping on an incline
.. Always press the brake pedal to hold the vehi-
cle in place and prevent it from "ro lling back"
¢
&_. Do not try to prevent the vehicle from
"rolling back" when a gear is engaged by in-
creasing the engine speed
¢ (D.
Starting on a hill
.. Set the parking brake .
.. Select the D position .
.. Press the accelerator pedal carefully . If your
safety belt is fastened, the parking brake is au-
tomatically released and your vehicle begins to
move.
69

Table of Contents

Related product manuals