What to do if Audio Analogue ENIGMA display is off, there is no sound and no response?
- JJoshua EdwardsAug 9, 2025
If your Audio Analogue Car Receiver's display is off, there's no sound, and the unit isn't responding, here's what you can check: * Ensure the unit isn't in STANDBY mode by pressing the STANDBY button on the front panel or remote. * Verify the power cable is correctly plugged into both the unit and the wall outlet. * Confirm the mains power switch is set to “1”. * If none of these work, it could be a burned-out fuse, in which case you should contact your Audio Analogue retailer for a fuse check or replacement.