Need help?Do you have a question about the Audio Note DAC Kit 3.1 and is the answer not in the manual?
Crucial safety information regarding potentially harmful voltages.
Guidance on fitting the mains transformer and choke into the chassis.
Instructions for setting the mains transformer primary for specific voltage regions.
Instructions for correctly orienting and mounting the mains transformer.
Connecting the mains transformer to the IEC socket and rocker switch.
Detailed list of components required for the M2 Power Supply board assembly.
Step-by-step assembly instructions for the M2 Power Supply PCB.
Instructions for placing and soldering resistors onto the M2 Power Supply board.
Connecting filament wires and other wiring to the M2 Power Supply board.
Instructions for mounting and securing voltage regulators to the heatsink.
Connecting the M2 Power Supply board to the Mains Transformer.
Performing a resistance measurement before powering on the unit.
Steps for initial power-on and checking operating voltages.
Summary table of expected DC and AC voltage readings for verification.
Mounting the Digital Power Supply board and connecting its wiring.
Connecting filament wires from M2 PSU to 5687 valve bases.
Wiring the 5687 board's HT to the M2 Power Supply board.
Guide to connecting the output transformers to the 5687 analog board.
General| Brand | Audio Note |
|---|---|
| Model | DAC Kit 3.1 |
| Category | Media Converter |
| Language | English |
To Next Page