Audio Technica AT-LP120XBT-USB User Manual

5
Part names and functions
Tonearm
1
Counterweight
Balances the tonearm and adjusts to provide the proper tracking
force.
2
Tracking force gauge ring
Use to adjust the tracking force.
3
Tonearm lift
Moves the tonearm vertically to and from the face of the record.
4
Tonearm rest with clamp
Use the clamp to secure the tonearm so that it does not move.
5
Anti-skate control dial
While the record is playing, a force acts on the stylus tip to pull it
inward. This force can be counteracted by setting the same values
for anti-skate and the tracking force.
6
Tonearm lift control lever
Operates the tonearm lift.
7
Locking ring
Rotate the ring to the left (counterclockwise) to secure the
headshell. To remove the headshell, rotate the ring to the right.
8
Headshell
The cartridge (AT-VM95E) is attached to the headshell (AT-HS6).
4
5
7
8
6
1
3
2

Audio Technica AT-LP120XBT-USB Specifications

General

Drive Method	Direct Drive
Motor	DC servo motor
Speeds	33-1/3 RPM, 45 RPM, 78 RPM
Bluetooth	Yes
USB Output	Yes
Phono Preamp	Yes
Cartridge	AT-VM95E
Signal-to-Noise Ratio	>50 dB
Bluetooth Version	5.0
Platter	Aluminum
Tonearm Type	S-shaped tonearm
Wow and Flutter	<0.2% WRMS
USB Function	A/D: 16 bit 44.1 kHz or 48 kHz USB selectable
Power Supply	100-240V, 50/60 Hz, 1.5A
Weight	8 kg
Bluetooth Output	SBC
Stylus	0.3 x 0.7 mil Elliptical Diamond Stylus