Need help?Do you have a question about the Audio Technica AT-LP1240-USB and is the answer not in the manual?
General| Type | Direct drive audio turntable |
|---|---|
| Interface | USB & Analog |
| Operation | Manual |
| Product color | Black |
| Wow & flutter | 0.1 % |
| Nominal speeds | 33 1/3, 45, 78 RPM |
| Turntable size | 332 mm |
| Platter material | Metal |
| Signal-to-Noise Ratio (SNR) | 55 dB |
| USB port | Yes |
| USB ports quantity | 0 |
| Power supply type | AC |
| AC adapter frequency | 60 Hz |
| AC adapter input voltage | 120 V |
| Power consumption (typical) | 13 W |
| Compatible operating systems | Windows XP +\\r Mac OS X + |
| Cables included | AC, Audio (3.5mm), RCA, USB |
Weight and Dimensions| Depth | 353 mm |
|---|---|
| Width | 450 mm |
| Height | 166.5 mm |
| Weight | 12500 g |
General warnings and cautions for safe product operation and handling.
Specific warnings for product usage to prevent hazards and damage.
Detailed guidelines for safe installation and operation of the apparatus.
Steps for correctly mounting the turntable platter onto the spindle.
Instructions for positioning and leveling the turntable for optimal performance.
Guide for attaching and securing the tonearm assembly.
Procedures for balancing the tonearm for correct stylus tracking force.
How to adjust the downward force applied by the stylus onto the record.
Adjusting anti-skate force to counteract inward tonearm pull during playback.
Detailed steps for starting and playing a vinyl record.
Adjusting the turntable's playback speed using pitch controls.
Step-by-step guide for removing and installing a new stylus.
Instructions for removing and installing a new cartridge and headshell.
To Next Page
