Audio Technica AT-LP1240-USB User Manual

2. Rotate the tonearm height adjustment dial and adjust the tonearm’s height.
3. After the adjustments are complete, rotate the tonearm height lock to set the tonearm.
When the turntable is moved
Using the product’s original packing materials, wrap the turntable in the reverse order from when you unwrapped it. If you do not have the packaging materials, take the following measures:
After unplugging the power cable plug from the outlet, remove the platter, and then wrap it so that it does not get damaged. If the product is moved while the platter is still seated, it may
damage the spindle.
Fix the tonearm with the clamp.
Remove the counterweight.
Remove the headshell from the tonearm with the cartridge’s protector attached, and then wrap the entire headshell assembly so that it does not get damaged.
Wrap the turntable body with a soft cloth so that it does not get damaged.
Troubleshooting

Audio Technica AT-LP1240-USB Specifications

General

Type	Direct drive audio turntable
Interface	USB & Analog
Operation	Manual
Product color	Black
Wow & flutter	0.1 %
Nominal speeds	33 1/3, 45, 78 RPM
Turntable size	332 mm
Platter material	Metal
Signal-to-Noise Ratio (SNR)	55 dB
USB port	Yes
USB ports quantity	0
Power supply type	AC
AC adapter frequency	60 Hz
AC adapter input voltage	120 V
Power consumption (typical)	13 W
Compatible operating systems	Windows XP +\\r Mac OS X +
Cables included	AC, Audio (3.5mm), RCA, USB

Weight and Dimensions

Depth	353 mm
Width	450 mm
Height	166.5 mm
Weight	12500 g