Audio Technica AT-LP1240-USB User Manual

USB function
A/D, D/A
16 bit 44.1 kHz or 48 kHz USB
selectable
Computer interface USB 1.1 Compliant Windows 7 or above, or MAC OSX or above
General specifications
Power supply requirements
120V AC, 60 Hz (U.S.A)
240V AC, 50 Hz (Australia)
230V AC, 50 Hz (Singapore)
Power consumption 13 W
Dimensions
450 mm (17.72″) × 353 mm (13.90″)
× 166.5 mm (6.56″)
(W × D × H)
Weight 12.5 kg (27.6 lbs)
Accessories
Slipmat, dust cover, platter, 45 RPM adapter, counterweight, headshell
with cartridge, power cable, USB cable, dual RCA (male) cable with integrated
ground wire, stylus target light
Replacement stylus
(sold separately)
ATN-XP5
Replacement headshell (sold separately) AT-HS1
Specifications are subject to change without notice due to improvements.
Visit our website www.audio-technica.com
One-Year Limited Warranty
Audio-Technica brand products purchased in the U.S.A. are warranted for one year from the date of purchase by Audio-Technica U.S., Inc.
(A.T.U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of
equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales slip or other proof of purchase date. Prior approval from A.T.U.S. is
required for return. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event
of unauthorized repair or modification, or removal or defacing of the product labeling.
For return approval and shipping information, contact the Service Dept., Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law, A.T.U.S. will have no liability for any consequential, incidental, or special damages; any warranty of merchantability or
fitness for a particular purpose expires when this warranty expires. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for warranty details.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
File Downloads
User Manual
Direct Drive Professional Turntable, AT-LP1240-USB
Download [optimized]
Download
Related Manuals
1. audio-technica Automatic Wireless Turntable User Manual Audio-Technica AT-LP60XBT Automatic Wireless Turntable User Manual Introduction Thank you...
2. Audio-technica Belt-Drive Turntable User Manual Audio-technica Belt-Drive Turntable User Manual Introduction Thank you for purchasing...
3. audio-technica Automatic Belt-Drive Turntable User Manual audio-technica Automatic Belt-Drive Turntable User Manual Introduction Thank you for...
4. audio technica AT-LP60 Automatic Stereo Turntable System Installation and Operation Manual audio technica AT-LP60 Automatic Stereo Turntable System Installation and Operation...
5. audio technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable Installation Manual audio technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable Installation Manual...
6. SEEYING Professional Turntable with USB Direct Encoding User Manual SEEYING Professional Turntable with USB Direct Encoding User Manual TT-930E-BT-BTT...

Audio Technica AT-LP1240-USB Specifications

General

Type	Direct drive audio turntable
Interface	USB & Analog
Operation	Manual
Product color	Black
Wow & flutter	0.1 %
Nominal speeds	33 1/3, 45, 78 RPM
Turntable size	332 mm
Platter material	Metal
Signal-to-Noise Ratio (SNR)	55 dB
USB port	Yes
USB ports quantity	0
Power supply type	AC
AC adapter frequency	60 Hz
AC adapter input voltage	120 V
Power consumption (typical)	13 W
Compatible operating systems	Windows XP +\\r Mac OS X +
Cables included	AC, Audio (3.5mm), RCA, USB

Weight and Dimensions

Depth	353 mm
Width	450 mm
Height	166.5 mm
Weight	12500 g