Audio Technica AT-LP1240-USB User Manual

Turntable specifications
Type 3-Speed, fully manual operation
Motor 16-pole, 3-phase, brushless DC motor
Drive method Direct drive
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable platter 332 mm diameter die-cast aluminum
Starting torque >4.5 kgf.cm
Braking system Electronic brake
Wow and flutter < 0.1% WRMS (JIS WTD) with 33 RPM
Signal-to-noise ratio > 55 dB (DIN-B)
Output levels
“PHONO”
“LINE (MM)”
5.5 mV nominal at 1 kHz, 5 cm/sec
300 mV nominal at 1 kHz, 5 cm/sec
RIAA 20-20kHz, +1/-3dB (In: 1.5mV 1kHz)
Tonearm specifications
Type
Static balanced S-shaped tonearm
with detachable headshell
Effective length 230 mm
Overhang 15 mm
Maximum tracking error angle Less than 3°
Stylus pressure adjustment
range
0 to 4.0 g
Applicable cartridge weight
range (including headshell)
13 to 18 g
Height of tonearm adjustment
range
0 to 6 mm
Anti-skating range 0 to 3 g
Cartridge and headshell specifications
Cartridge Model AT-XP5
Cartridge Type VM
Recommended load
impedance
47,000 ohms
Output voltage 5.5 mV (1 kHz, 5 cm/sec)
Stylus 0.3 × 0.7 mil bonded elliptical stylus
Cantilever ABS with carbon
Tracking force range 2.0 to 4.0 g (3.0 g standard)
Cartridge weight 6.2 g (0.22 oz)
Headshell model AT-HS1
Headshell weight 10 g (0.35 oz)
Headshell overhang
adjustment
± 4 mm

Audio Technica AT-LP1240-USB Specifications

General

Type	Direct drive audio turntable
Interface	USB & Analog
Operation	Manual
Product color	Black
Wow & flutter	0.1 %
Nominal speeds	33 1/3, 45, 78 RPM
Turntable size	332 mm
Platter material	Metal
Signal-to-Noise Ratio (SNR)	55 dB
USB port	Yes
USB ports quantity	0
Power supply type	AC
AC adapter frequency	60 Hz
AC adapter input voltage	120 V
Power consumption (typical)	13 W
Compatible operating systems	Windows XP +\\r Mac OS X +
Cables included	AC, Audio (3.5mm), RCA, USB

Weight and Dimensions

Depth	353 mm
Width	450 mm
Height	166.5 mm
Weight	12500 g