Contents [ hide
1 Introduction
2 Package contents
3 Safety precautions
4 Cautions for the product
5 For customers in the USA
6 Safety instructions
7 Safety precautions
7.1 FCC Notice
8 For customers in Canada
9 Notes on use
9.1 Turntable body
10 Cartridge
11 Part names and functions
11.1 Overall diagram
12 Part names and functions
12.1 Tonearm
13 Preparation for use
13.1 Placing the platter
13.2 Setting up the turntable
13.3 Assembling the tonearm
13.3.1 Tonearm balance and tracking force
13.4 Preparation for use
13.4.1 Setting tonearm balance
13.5 Setting tracking force
13.6 Setting the anti-skate adjustment
13.7 Installing/removing the dust cover
14 Preparation for use
14.1 Setting pre-amplifier selector switch
14.2 Connecting to connectable equipment (active speakers, amplifiers, DJ mixer,
etc.)
14.3 Connecting the power cable
15 Playing a record
15.1 Before playing a record
15.2 Playing a record
15.3 Setting pitch
15.4 Measuring pitch
15.5 Adjusting platter start speed and brake speed
16 Playing a record
16.1 Reversing the record
16.2 Pausing the record
16.3 Stopping the record
17 Care
17.1 Turntable body
17.2 Stylus tip
18 Replacing the stylus
18.1 Removing the stylus
18.2 Installing a new replacement stylus
18.3 Replacing a cartridge
19 Adjusting the tonearm’s height
20 When the turntable is moved
21 Troubleshooting
22 Dimensions
23 Specifications
23.1 File Downloads
23.2 Related Manuals
Introduction
Thank you for purchasing this Audio-Technica product.
Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference. This product can be used only in the
countries where the product is sold. Make sure that the operating voltage of the product is correct for the country you live in.
Package contents
Make sure that you have all the included items listed below before using this product.
If some items are missing or damaged, contact your local Audio-Technica dealer.
Turntable body
Dust cover
Platter
Slipmat
Counterweight
Headshell (AT-HS1) with cartridge (AT-XP5)
45 RPM adapter
USB cable (1.9 m (6.2′))
RCA audio cable (Approx. 1.4 m (4.6′))
Power cable
Stylus target light
User manual (this document)
After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.
Safety precautions
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Cautions for the product
Warning:
Do not use a power cable other than the included one. Doing so may cause a fire, electric shock, damage, or malfunction.
Stop using the product and disconnect the power cable from the product if the product begins to malfunction, producing smoke, odor, heat, unwanted noise, or showing other signs of
To Next Page
Loading...
Need help?
General
Weight and Dimensions
