Need help?Do you have a question about the Audio Technica AT-LP120XBT-USB and is the answer not in the manual?
General| Drive Method | Direct Drive |
|---|---|
| Motor | DC servo motor |
| Speeds | 33-1/3 RPM, 45 RPM, 78 RPM |
| Bluetooth | Yes |
| USB Output | Yes |
| Phono Preamp | Yes |
| Cartridge | AT-VM95E |
| Signal-to-Noise Ratio | >50 dB |
| Bluetooth Version | 5.0 |
| Platter | Aluminum |
| Tonearm Type | S-shaped tonearm |
| Wow and Flutter | <0.2% WRMS |
| USB Function | A/D: 16 bit 44.1 kHz or 48 kHz USB selectable |
| Power Supply | 100-240V, 50/60 Hz, 1.5A |
| Weight | 8 kg |
| Bluetooth Output | SBC |
| Stylus | 0.3 x 0.7 mil Elliptical Diamond Stylus |
General safety guidelines and warnings for product usage, including avoiding moisture, shocks, and excessive heat.
Regulatory information for USA customers, including FCC Notice and RF Exposure Statement compliance.
Regulatory information for Canadian customers, including IC statement and compliance with Industry Canada regulations.
Guidelines for positioning the turntable, avoiding extreme environments, and preventing vibration or radio interference.
Recommendations for protecting the stylus and avoiding physical contact or impact with the cartridge.
Identification and description of turntable components visible from the top, including platter, tonearm, and controls.
Identification and description of turntable components visible from the front and rear, including output terminals and power input.
Detailed explanation of tonearm components such as counterweight, lift, and headshell, with their functions.
Steps for correctly seating the platter and placing the felt mat on the turntable spindle.
Guidance on positioning the turntable on a level surface and avoiding environmental factors that affect performance.
Instructions for removing the tonearm securing tie and inserting the headshell into the tonearm.
Procedure for balancing the tonearm and setting the correct tracking force for optimal playback.
Steps for adjusting the stylus pressure and setting the anti-skate control for accurate record groove tracking.
Instructions on how to install and remove the dust cover, and considerations for its use during playback.
Overview of connecting the turntable to speakers or other devices via Bluetooth or RCA audio cable.
Detailed steps for pairing the turntable with Bluetooth receiver devices for wireless audio playback.
Explanation of the indicator LED patterns and what they signify regarding Bluetooth connection status.
Guidance on setting the pre-amplifier selector switch for different audio outputs and connection types.
Instructions for connecting the turntable to a computer via USB for audio recording and playback.
Steps to prepare the turntable before playing a record, including removing the stylus protector and powering on.
Procedure for starting record playback, including placing the record, setting speed, and lowering the tonearm.
How to check platter speed using strobe dots and adjust pitch using the slide control or quartz lock.
Instructions on how to pause playback by lifting the tonearm using the lift control lever.
Steps to safely stop record playback, including lowering volume, lifting tonearm, and powering off.
Step-by-step guide to safely remove the stylus from the cartridge, including releasing the headshell.
Instructions for mounting a new stylus onto the cartridge and attaching the headshell to the tonearm.
Recommendations for cleaning the turntable body, including using a soft cloth and avoiding solvents.
Guidance on cleaning the stylus tip to maintain sound quality and prevent damage, using a stylus cleaner.
To Next Page
