Audio Technica AT-LP140XP User Manual

3
Notes on use
Turntable body
• Do not set and use the product in locations that are considerably hot
or humid, dirty, or subject to extreme vibrations.
• The product should be positioned on a flat, level surface.
Cartridge
• Attach the protector to protect the stylus when the product is not in
use.
• Do not touch the stylus of the cartridge with your finger.
• Do not allow the cartridge’s stylus to bump against the platter or the
edge of the record.

Audio Technica AT-LP140XP Specifications

General

Type	Direct drive DJ turntable
Operation	Manual
Motor type	DC motor
Brake system	Electronic brake
Pitch control	Yes
Wow & flutter	0.2 %
Nominal speeds	33 1/3, 45, 78 RPM
Starting torque	2.2 kg/cm
Motor brush type	Brushless
Number of speeds	3
Pitch control range	-8 - 16 %
Signal-to-Noise Ratio (SNR)	50 dB
Product color	Silver
Platter material	Aluminum
USB port	-
AC input voltage	115 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	4.3 W
Shape	S-shaped tonearm
Overhang	16 mm
Tonearm type	Statically balanced tonearm
Tracking angle	3 °
Stylus pressure	6.2 g
Anti-skating range	0 - 4 g
Cables included	RCA/GND

Weight and Dimensions

Weight	10000 g