Need help?Do you have a question about the Audio Technica AT-PL50 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Signal-to-Noise Ratio (SNR) | 45 dB |
| Power supply type | AC |
| AC adapter frequency | 60 Hz |
| AC adapter input voltage | 120 V |
| Power consumption (typical) | 3 W |
Weight and Dimensions| Weight | 2400 g |
|---|---|
| Product dimensions (WxHxD) | 360 x 97 x 357 mm |
Prevent fire or shock by avoiding rain, moisture, and opening the cover.
Do not open the cover; internal adjustments are for qualified professionals only.
Configure the internal pre-amplifier for PHONO or AUX input.
Steps to install the platter, drive belt, and record mat.
Connect RCA cables to the right and left channel inputs of the amplifier.
Use adapter cables for connecting to computers or devices with 3.5mm jacks.
Instructions for starting, stopping, and pausing playback using automatic controls.
Instructions for manually placing the tonearm and starting record playback.
Detailed guide on how to safely remove and install a new stylus assembly.
Solutions for problems like the turntable not operating or the tone arm not returning.
Diagnosing and resolving problems related to no sound or distorted sound output.
Technical details and measurements of the AT-PL50 turntable.
Recommendations for optimal use, cleaning, and handling of the turntable.
To Next Page
