15
Connecting via Bluetooth
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
Pairing a Bluetooth device
Read the user manual for the Bluetooth device.
Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
Wear the headphones to hear voice guidance during pairing.
1
Remove the headphones (L (left) and R (right)) from the charging case.
The indicator lamps will light in white and then start to flash. (The indicator lamp on one side will flash white
quickly, and the other will flash white slowly.)
2
Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth
device finds the product, “R_ATH-CKR70TW” will be displayed on the device.
Depending on the order the L (left) and R (right) side headphones are removed from the charging case, “L_
ATH-CKR70TW” may be displayed.
For information about using your Bluetooth device, refer to the device’s user manual.
3
Select “R_ATH-CKR70TW” to pair the product and your Bluetooth device.
Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode,
PIN code, PIN number, or password.
Bluetooth ON
R_ATH-CKR70TW
To Next Page
Loading...
