36
Specifications
Headphones
Type Dynamic
Driver 5.8 mm
Sensitivity 100 dB/mW
Frequency response 20 to 25,000 Hz
Impedance 16 ohms
Microphone
Type MEMS type
Polar pattern Omnidirectional
Sensitivity −38 dB (1 V/Pa, at 1 kHz)
Frequency response 100 to 10,000 Hz
Communication specifications
Communication system Bluetooth version 5.0
Maximum RF output 10 mW EIRP
Maximum communication range Line of sight - approx. 10 m (33')
Frequency band 2.402 GHz to 2.480 GHz
Modulation method FHSS
Compatible Bluetooth profiles A2DP, AVRCP, HFP
Supported codec Qualcomm® aptX
™
audio, AAC, SBC
Supported content protection
method
SCMS-T
Transmission band 20 to 20,000 Hz
To Next Page
Loading...
