8
Using the product
Swivel mechanism
You can fold the housing so that it lies flat. After folding it flat, you can also fold the housing inside the headband.
• The swivel mechanism cannot rotate more than 90 degrees. Do not apply excessive force to this mechanism.
Folding compactly
Using the joint as a fulcrum, the housing can be folded into the headband.
• When folding the product, detach the included cable.
• Be careful not to pinch your fingers, etc. in the joint.
• Be sure to return the housing to its original position before using the product.
Folded down and flat Flat, with housing
folded inward
L (left) sideR (right) side
Joint
Joint
Fold
Unfold
To Next Page
Loading...
Need help?
General
