User's Manual 2. Setting up the Phone
Version 2.0.1 13 May 2013
Accesses menus (1) Call Log (2) Directory (3) Speed Dial (4) Settings (5)
Status (6) Administration.
Accesses a list of recently dialed numbers; one can be selected to redial.
Places an active call on hold.
Keys for entering numbers, alphabetical letters and symbols (e.g., colons)
Activates the speakerphone, allowing a hands-free conversation.
Activates a call using an external headset.
Increases or decreases the volume of the handset, headset,
speakerphone, ring tone and call progress tones.
2.2.2 Rear View
The rear view of the phone is shown in the figure below and described in the table below.
Figure 2-2: Rear View
Table 2-2: Rear View Description
Handset jack, i.e., RJ-9 port, to connect the handset.
RJ-45 port to connect to the Ethernet LAN cable for the LAN connection
(uplink - 10/100 Mbps). If you're using Power over Ethernet (PoE), power
to the phone is supplied from the Ethernet cable (draws power from either
a spare line or signal line).
RJ-45 port for connecting the phone to a PC (10/100 Mbps downlink).
12V DC power jack that connects to the AC power adapter.
Headset jack, i.e., RJ-9 port that connects to an external headset.
To Next Page
Loading...
