420HD IP Phone with Microsoft Lync
User's Manual 26 Document #: LTRT-11891
4.2 Selecting Ring Tone
The phone provides a selection of ring tones that you can choose from to indicate incoming calls.
If line extensions are defined on your phone, you can assign a ring tone per line extension.
To select a ring tone:
1. Access the Ring Tone screen (MENU key > Settings menu > Ring Tone submenu).
2. Navigate to and select a ring tone. A sample of each ring tone is played as you navigate
through the list.
3. Set ring tone volume by pressing the VOL or VOL
key:
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4. Press the Select softkey to apply your settings.
5. Press the Save softkey to save your settings.
To Next Page
Loading...
