BroadSoft SIP Trunk
Quick Guide 14 Document #: LTRT-14020
10. Click Reset to install the files by saving them on the device's flash memory with a
device. Once complete, the following is displayed:
Figure 4-7: Current CMP Version ID
11. Click End Process to close the wizard, and then log in again to the Web interface.
12. Enter your login username and password (Admin, Admin respectively), and then click
Login; a message box appears informing you of the new .cmp file version.
13. Click OK; the Web interface becomes active, reflecting the upgraded device.
To Next Page
Loading...
