AudioCodes Mediant 500 - SIP Trunk and PSTN Integration

Quick Guide 5. Configure Device
Version 7.2 19 AudioCodes Mediant Gateway
5.3 Configure General SIP Parameters
This step identifies the device configuration needed to support the SIP General Parameters
configuration.
5.3.1 Configure SIP General Settings
This step shows how to configure the SIP General Settings.
 To configure the SIP General Settings parameters:
1. Open the SIP Proxy & Registration Parameters page (Setup menu > Signaling &
Media tab > SIP Definitions folder > SIP Definitions General Settings).
2. Configure following parameters:
Parameter Value
Gateway Settings
Source Header For Called Number
Use To header
Gateway Session Expires
Session Expires Method
Update
Disconnect Supervision
Broken Connection Mode
Ignore
Figure 5-7: Configuring SIP General Settings Parameters
3. Click Apply.