AudioCodes Mediant 500 - Network Interface and DMZ Connectivity

Quick Guide 5. Configure Device
Version 7.2 17 AudioCodes Mediant Gateway
5.2.1 Configure Network Interface
Configure network interface, as described below:
1. Open the IP Interfaces table (Setup menu > IP Network tab > Core Entities folder >
IP Interfaces).
2. Modify the existing network interface ('Voice'):
a. Select the 'Index' radio button of the OAMP + Media + Control table row, and
then click Edit.
b. Configure the interface as follows:
Parameter Value
Name
Voice (arbitrary descriptive name, you may change it)
Application Type
OAMP + Media + Control (leave as is)
Ethernet Device
vlan 1
IP Address If working in Method A: Global-IP-Address (public
address)
If working in Method B: Local-DMZ-IP-Address
Prefix Length
Subnet mask in bits, e.g.28 (for 255.255.255.240)
Default Gateway
The default gateway IP address
(In Method B: router's IP address)
Primary DNS Server IP
Address
Primary DNS IP address
Secondary DNS Server IP
Address
Secondary DNS IP address (optional)
3. Click Apply.
The figure below shows an example of a configured IP network interface.
Figure 5-4: Example of a Configured Network Interface in IP Interfaces Table