AudioCodes Mediant 500 - Initial Device Cabling and Access; Connecting Device for Initial Access; Device Panel Diagrams

Quick Guide 3. Cable Device for Initial Access
Version 7.2 7 AudioCodes Mediant Gateway
3 Cable Device for Initial Access
The device's factory default IP address for operations, administration, maintenance, and
provisioning (OAMP) is 192.168.0.2/24 (default gateway 192.168.0.1).
1. Change your PC's IP address and subnet mask to correspond with the device's
default IP address.
2. Cable as follows:
• Connect the PC to the device's Ethernet port labelled Port 1 (left-most port).
• Ground the device using the grounding lug.
• Using the supplied AC power cable, connect the device's AC port to a standard
electrical wall outlet.
Figure 3-1: Mediant 500 – Front and Rear Panels