AudioCodes Mediant 500L - Connecting to the Power Supply; Figure 5-15: AC;DC Power Adapter; Table 5-3: Power Specifications

Hardware Installation Manual 34 Document #: LTRT-10489
Mediant 500L
5.6 Connecting to the Power Supply
The device is powered by an external 12V AC/DC power adapter (supplied), connected to a
standard alternating current (AC) electrical wall outlet.
Table 5-3: Power Specifications
Item Description
Power Supply
Single universal external AC power supply
Input Ratings
100-240 VAC, 50-60 Hz
Output Ratings
12V/3A
Max. Power Consumption
 Only SBC (no BRI): 7W
 BRI:

2.5W per NT port
 0.4W per TE port
Warning: Use only the AC/DC power adapter supplied with the device.
ご注意
本製品に添付の電源ケーブルは、Mediant 500L Gateway & E-SBC
に専用設計されているため、汎用性がありません.
本電源ケーブルを他の機器に使用されないよう、ご注意ください.
The device is shipped with the AC/DC power adapter shown in the figure below. The power
adapter also supports interchangeable plugs to suite the electrical wall outlet type
requirement of the country in which the device is being installed.
Figure 5-15: AC/DC Power Adapter