Assigning an IP Address to the Device
Use the device's factory default IP address (192.168.0.2/24 and Default Gateway 192.168.0.1) to initially access
the device's Web-based management interface and then change it to suit your networking addressing scheme
for subsequent connectivity.
1. Using a CAT-5e/6 straight-through RJ-45 Ethernet cable, connect the device's Ethernet port GE 1 (front
panel) to the LAN port on a computer.
2. Change the IP address of your computer to correspond with the device's default IP address and subnet
mask.
3. On your computer, open a standard Web browser (for example, Google Chrome), and then in the URL
field, enter the device's default IP address; the Web Login screen appears:
4. Type in the default username (Admin) and password (Admin), and then click Log In.
5. Open the IP Interfaces table (Setup menu > IP Network tab > Core Entities folder > IP Interfaces).
To Next Page
Loading...
