AudioCodes MediaPack MP-114 Installation Manual

Installation Manual 44 Document #: LTRT-59809
MediaPack Series
3. Click the Start Software Update button; the 'Load a CMP file' Wizard page appears:
Figure 3-10: Load CMP File Wizard Page
Note: At this stage, you can quit the wizard, by clicking Cancel without requiring
a device reset. However, once you start uploading the cmp file, the process
must be followed through and completed with a device reset.

AudioCodes MediaPack MP-114 Specifications

General

Model	MP-114
Category	Gateway
Analog Ports	4 FXS
Network Interfaces	2 x 10/100Base-T Ethernet
Voice Codecs	G.711, G.726, G.723.1, G.729A/B
Fax Support	T.38
Management	Web-based management, CLI, SNMP
Security	SRTP, TLS, HTTPS
Ports	4 RJ-11, 2 RJ-45
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90%, non-condensing