AudioCodes MediaPack MP-114 Fast Track Guide

Analog Fast Track Guide 1. Quick Start
Version 4.8 7 March 2006
1 Quick Start
This guide provides you with information on how to install the MediaPack for the first time. Prior
knowledge of IP networks is preferred.
Refer to the configuration procedures, outlined in Figure 1-1, for information on how to install,
initialize, configure the device and make calls. For detailed information on how to fully configure
the gateway refer to the MediaPack User’s Manuals.
Figure 1-1: Required Steps to Install the MediaPack

AudioCodes MediaPack MP-114 Specifications

General

Model	MP-114
Category	Gateway
Analog Ports	4 FXS
Network Interfaces	2 x 10/100Base-T Ethernet
Voice Codecs	G.711, G.726, G.723.1, G.729A/B
Fax Support	T.38
Management	Web-based management, CLI, SNMP
Security	SRTP, TLS, HTTPS
Ports	4 RJ-11, 2 RJ-45
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90%, non-condensing