AudioEngine A5+ System Manual

1. Power-cycle the speakers by switching them off and back on using the power switch on the rear panel.
2. Be sure the speakers are not in MUTE or SLEEP mode (if so, the front panel indicator light will be flashing).
3. Check that the cables from your audio sources to the speaker are properly connected. Confirm by unplugging
the audio cables and then reconnecting. Try using as many different inputs and input sources as possible to
see if the problem follows.
4. Check speaker wire connections from the left (powered) speaker to the right (passive) speaker. Confirm by
removing the speaker wire from on each speaker and reconnecting. Also check speaker wire polarity by
verifying that the wires are going to same terminals on both speakers.
5. Verify that your audio input source components or devices are all powered on and the volume levels are turned
up.
6. If using a computer, verify that the audio output balance setting is centered for the OS and all apps.
7. Make sure the speakers are not too close to a wall or other obstruction, which could limit bass output.
8. Decrease the volume level of the audio input source and increase the volume of the speakers.
9. If you are using a wireless adapter, preamp, or external DAC with these speakers, remove these (temporarily)
and connect the audio source directly to the speakers.
10. If your input source has its own EQ or other sound settings, make sure they are all temporarily turned off.
11. Also try moving the speakers to a different location to see if something is causing interference in the current
location. Something as simple as a wireless internet router, cordless or mobile phone, or halogen lamp near
the speakers can all cause interference.
A5+ troubleshooting tips – remote control
Remote control is not working or remote range is reduced.
1. Make sure nothing is blocking the remote control receiver, which is in the left powered speaker.
2. Check the remote battery to be sure it is installed correctly.
3. Replace the battery with another CR2025 battery
Downloads
Audioengine A5+ Speaker System Manual – Download
Related Manuals:
1. Audioengine A5+ Home Music System W/ Bluetooth Aptx-Hd Manual Audioengine A5+ Wireless Premium Powered
Speakers Welcome to the Audioengine...
2. Audioengine A2+ Speaker System Manual Audioengine A2+ Setup Guide www.audioengineusa.com Premium Powered
Desktop Speakers Basic...
3. audioengine 512 bluetooth speaker user manual 512 Quick Setup Power ON/OFF To turn on your 512,...
4. Audioengine A1 Home Music System W/ Bluetooth Aptx Manual Audioengine ONE User Manual Premium Wireless
Speaker System Welcome to...
5. Audioengine A2+ Home Music System W/ Bluetooth Aptx Manual Audioengine 2+ Wireless Premium Powered
Speakers Welcome to the Audioengine...
6. audioengine HD3 Premium Powered Desktop Speakers Quickstart Guide www.audioengineusa.com Premium
Powered Desktop Speakers Quickstart Guide Welcome to the...

AudioEngine A5+ Specifications

General

Product color	White
Housing material	-
Recommended usage	Universal
Remotely operated	Yes
Suitable for outdoor use	No
Magnet type	Neodymium
Tweeter diameter	20 mm
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Woofer diameter (imperial)	5 \
Amplifier class	A/B
Impedance	- Ω
Frequency range	50 - 22000 Hz
RMS rated power	50 W
Signal-to-Noise Ratio (SNR)	95 dB
Peak Music Power Output (PMPO)	150 W
Total Harmonic Distortion (THD)	0.05 %
Cables included	AC, Audio (3.5mm)
Connectivity technology	Wired
AC input voltage	115 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	4 W

Weight and Dimensions

Depth	200 mm
Width	180 mm
Height	270 mm
Weight	11400 g