AudioEngine N22 Manual

product, send us an email at: support@audioengineusa.com or call toll-free in the United States at:
(877) 853-4447.
Contact Us
If you have any questions or feel you may need service contact the reseller
where you purchased your product or feel free to email us directly at:
support@audioengineusa.com or call toll-free in the United States:
(877) 853-4447
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials, and truly useful features are what Audioengine is all about. We
sincerely hope you get as much enjoyment from our products as we’ve had
creating them! For information about our other products go to:
www.audioengineusa.com
Information for Users on Disposal of Old Equipment [European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general
household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for
the recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential
negative effects on the environment and human health that could otherwise be caused by inappropriate waste
handling of this product. For more information about collection point and recycling of this product, please contact your
local municipal office, your household waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in
your country for the treatment of old electrical and electronic equipment.
N22 Quick Setup
Step 1 – Placement
Set the N22 amplifier on a solid surface and make sure there is plenty of ventilation and space around the amplifier
top and bottom. The integrated stand is not designed to be removed as the N22 uses a passive convection system
for heat dissipation. Keeping your N22 upright with the stand attached is important for optimal ventilation and to keep
your N22 running cool.
Step 2 – Connecting the Speaker Wire
The N22 is a stereo power amplifier that will power one pair of passive speakers between 4 and 8 ohms. To connect
N22 to your speakers you will need 2-conductor stranded speaker wire, which is included. The N22 uses high quality,
ve-way gold plated binding posts that will accept heavy gauge bare wire, banana plugs, spade lugs, or pin
terminators. If you use your own speaker wire we recommend using at least 16 gauge wire and using the same
length of wire from the amplifier to each speaker. It’s also a good idea to turn off your amplifier before connecting
power, audio sources or speakers.
Preparing the Speaker Wire

AudioEngine N22 Specifications

General

Amplifier class	A/B
Input sensitivity	410 mV
Audio output channels	- channels
Peak power per channel	1800 W
Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.02 %
AC (power) in	Yes
USB 2.0 ports quantity	1
Speakers connectivity type	RCA
Purpose	-
Product color	Black
Volume control	Rotary
Cables included	AC, Audio (3.5mm), RCA
Connectivity technology	Wired & Wireless
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Package weight	4600 g

Weight and Dimensions

Depth	140 mm
Width	70 mm
Height	180 mm
Weight	1600 g