AudioEngine N22 Manual

• Unplug this apparatus during lightning storms or when unused for long periods of time to prevent damage to
this product.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped. Do not attempt to service this product
yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please contact
the manufacturer to be referred to an authorized service center near you.
To prevent risk of fire or electric shock, avoid over loading wall outlets, extension cords, or integral convenience
receptacles .
Do not let objects or liquids enter the product as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock.
See product enclosure bottom for safety related markings.
Use Proper Power Sources. Plug the product into a proper power source, as described in the operating
instructions or as marked on the product.
Avoid power lines– Use extreme care when installing an outside antenna system to keep from touching power
lines or circuits, as contact with them may be fatal. Do not install external antennas near overhead power lines
or other electric light or power circuits, nor where an antenna can fall into such circuits or power lines.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: This device may not cause harmful interference and this device
must accept any interference received, including interference that may cause undesired operation.
Introduction
Welcome to the Audioengine family and congratulations on your purchase of the Audioengine N22 Premium Desktop
Audio Amplifier! The Audioengine team is dedicated to bringing you the highest quality listening experience possible
and the Audioengine N22 amplifier was designed with the same attention to detail and operational simplicity as other
Audioengine products. As with our other past efforts we thank our customers, distributors and resellers for inspiring
us to create another great Audioengine product.
Connect your iPod, computer, and speakers or headphones for a greatsounding personal stereo system with N22. Or
plug in an optional Audioengine wireless audio adapter and use N22 to power your home theater rear speakers.
Features

AudioEngine N22 Specifications

General

Amplifier class	A/B
Input sensitivity	410 mV
Audio output channels	- channels
Peak power per channel	1800 W
Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.02 %
AC (power) in	Yes
USB 2.0 ports quantity	1
Speakers connectivity type	RCA
Purpose	-
Product color	Black
Volume control	Rotary
Cables included	AC, Audio (3.5mm), RCA
Connectivity technology	Wired & Wireless
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Package weight	4600 g

Weight and Dimensions

Depth	140 mm
Width	70 mm
Height	180 mm
Weight	1600 g