AudioEngine N22 Manual

N22 amplifier with integrated stand
N22 power supply
Detachable AC power cord
1/8″ audio cable, 2 meters (~6.5 ft)
RCA audio cable, 1 meters (~3.28 ft)
Speaker wire (16AWG),
1.75 meters (~5.75 ft)
Cloth amplifier bag
Cloth power supply bag
Cloth cable bag
Setup Guide
Works With
Audioengine P4 passive speakers
Audioengine wireless audio adapters
Desktop computers and laptops (Mac and PC)
iPods and iPhones
Headphones
Rear channel surround speakers
Any products with mini-jack or RCA audio outputs!
Unpacking
Your Audioengine N22 amplifier was carefully tested and inspected before packaging and shipping. After unpacking
please check for any damage. It is rare that any damage occurs during shipping, but if this does happen contact the
shipping company immediately. We recommend that you keep the original carton and packing material.
Setup and Operation
Step 1 – Placement

AudioEngine N22 Specifications

General

Amplifier class	A/B
Input sensitivity	410 mV
Audio output channels	- channels
Peak power per channel	1800 W
Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.02 %
AC (power) in	Yes
USB 2.0 ports quantity	1
Speakers connectivity type	RCA
Purpose	-
Product color	Black
Volume control	Rotary
Cables included	AC, Audio (3.5mm), RCA
Connectivity technology	Wired & Wireless
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Package weight	4600 g

Weight and Dimensions

Depth	140 mm
Width	70 mm
Height	180 mm
Weight	1600 g