Audiolab 9000A - Power Amplifier Specifications; Headphone Amplifier Specs

10.Specifications
Page 19
Input Sensitivity
Signal-to-Noise Ratio (S/N)
Max. Output Current
Gain
Rated Power Output
Frequency Response
Total Harmonic Distortion (THD)
Power Amplifier Section
Total Harmonic Distortion (THD)
Output Impedance
Load Impedance
General
Standby Power Consumption
Net Weight
Gross Weight
Headphone Amplifier
Dimensions (mm) (W x H x D)
Carton Size (mm) (W x H x D)
Finish
Power Requirements
(depending on region)
Standard Accessories
1Vrms
> 110dB (A-weighted)
15A
+29dB
2 x 100W (8 ohms, THD<1%);
2 x 160W (4 ohms, THD<1%)
20Hz-20kHz (+/-0.3dB)
<0.002% (1kHz @ 50W / 8 ohms)
<0.5W
8.4kg
10.2kg
< 0.01% (1kHz, 50mW )
2.35 ohms
20-600 ohms
444 x 342 x 89
514 x 470 x 161
Black / Silver
220-240V ~ 50/60Hz;
100-120V ~ 50/60Hz
Power Cord, Remote Control, User Manual, Antennas, etc.
Important
Safety Information
Contents Getting Started Controls and Functions
Remote Handset
Warranty Coverage
Connections Menu Options
System Operations
Specifications