Need help?Do you have a question about the Audiolab DA-4000 and is the answer not in the manual?
Explains safety symbols like lightning and exclamation marks.
Provides a brief overview of the front panel controls and indicators.
Details the function and operation of the power switch.
Explains the meaning of each LED on the front panel.
Describes the adjustable features controlled by rear-panel DIP switches.
Details the XLR input and Speakon output connector configurations.
Explains balanced XLR and Speakon connections for audio inputs/outputs.
Details how to adjust the input gain for all channels.
Fine-tuning individual channel levels via front-panel potentiometers.
Defines sensitivity and its relation to output power.
Explains how to select maximum output peak power for channels.
Further details on adjusting channel gain using front-panel controls.
Explains how channel mute status is indicated by LEDs.
Describes power, bridge mode, and PAL indicators.
Explains channel-specific LEDs for signal, VPL, CPL, VHF, and Temp.
Lists key technical parameters like channels, output power, and impedance.
Details THD, Signal-to-Noise Ratio, and Frequency Response.
Covers selectable gain ranges and default gain settings.
To Next Page
General
