7; !Tztufn!Tfuvq
Page 6
When the M-NET is first turned on, please do the system setup.
Press MENU and then select System settings, you should find below items:
Network: This allows you to do below settings:
a) Network wizard: Simplifies the setup of your radio’s internet connection by
taking you through step-by-step instructions.
b) PBC Wlan setup: Used to pair your radio
with a router that uses WPS security.
c) View settings: View the MAC address,
Wlan region, etc.
d) Wlan region: Where you are using your
radio - Europe, USA etc.
e) Manual settings: Detailed control of wired and wireless connections.
f) NetRemote PIN Setup: Used to setup a PIN number which the radio will
request when the Remote Control App is first used.
g) Network profile: Shows the names of the last four wireless networks the
M-NET has been connected to.
h) Keep network connected: Allows you to specify whether Wi-Fi should
remain active while in Standby or in non Wi-Fi modes. This should be set to
YES if you use the Remote Control App.
Time/Date: This allows you to set time/date, format, auto update.
Language: This allows you to change the display language used. Select
your preferred one and press SEL.
Factory Reset: Puts all the settings back to their default as they were when
they left the factory.
Ȕ
Ȕ
Ȕ
Ȕ
Software update: Use this option to download new firmware for the M-NET.
If you select this item, the M-NET will contact our server and see if a newer
version of software is available.
If new software is found the M-NET will prompt you if you want to download it
or not. It is highly suggested to update the firmware from time to time to take
advantage of any bug fixes or new features. A software update may take several
minutes.
Setup wizard: This guides you through the essential settings: Date/Time,
Auto update, Set Tim/Date, Network wizard.
Info: This shows you the details of the current system including
a) SW Version: Software version number
b) Radio ID: Unique code used to identify this particular radio device.
c) Friendly name: Name by which the radio is identified on a network.
Backlight: This allow you to modify the brightness of display.
Ȕ
Ȕ
Ȕ
Ȕ
To Next Page
Need help?
General
