8; !Ofuxpsl!Tfuvq!.2
Page 7
When the M-NET is first turned on, or when the network is changed, the unit will
require setting up before network functions such as internet radio or streaming
music player are available. This should only need to be done once (per network),
as the unit will remember the settings even when switched off and unplugged.
Connecting to the network through the LAN interface
By connecting this unit to the network via the LAN interface, you can play back
audio files stored on the components on the network, including your PC, and listen
to internet radio stations.
Connect the LAN terminal on this unit to the LAN terminal on your router
with a straight LAN cable (CAT 5 or higher).
Switch on the M-NET. Press MENU and select Systems settings->Network
->Network wizard. It will start searching all wired and wireless network.
You can use //SEL/BACK on the remote handset or CONTROL KNOB
on the unit to browse the menu. You will also find the other settings under
Network settings menu.
Select Wired from Service Set Identifier (SSID) list.
Ȕ
Ȕ
Ȕ
To Next Page
Loading...
Need help?
General
