Audiolab M-ONE User Manual

:; !Tqfdjgjdbujpot
Page 10
(Measurement made with 230V power supply)
Pre-Amplifier Section
Gain 51dB (line inputs)
Input sensitivity 515mV (line inputs)
Input impedance 10K (line inputs)
Power Amplifier Section
Rated power output 2 x 36W RMS (8 ohm)
Frequency response -3dB (10Hz - 30kHz, Ref. 1kHz)
-1dB (20Hz - 20kHz, Ref. 1kHz)
Total harmonic distortion (THD) 0.01% (@1kHz, 1W, 20Hz - 20kHz)
Signal-to-noise ratio (S/N) 81 (1W, @1kHz)
Standby Power Consumption <0.5W
Dimensions (W x H x D ) 246.5 x 114 x 295 mm
Carton size (W x H x D) 411 x 227 x 415 mm
Net weight 5.5kg.
Gross weight 6.5kg.
Power Requirements
(depending on region)
220 - 240V (50 ~ 60Hz)
100 - 120V (50 ~ 60Hz)
$+021(LQGG 

Audiolab M-ONE Specifications

General

Type	Integrated Amplifier
DSD Compatibility	Yes (DSD64, DSD128, DSD256)
DAC	ESS Sabre32 ES9018K2M
Inputs	Optical, Coaxial, USB, Bluetooth, Analog RCA
Outputs	1 x Headphone
Frequency Response	20Hz - 20kHz
Sampling Rate	Up to 384kHz
Bluetooth	Yes
Headphone Output	Yes (6.3mm)
Input Sensitivity	200mV
Input Impedance	10kΩ
Frequency Response Variation	+/- 0.5dB
Signal-to-Noise Ratio	>110dB