10. ENTER THE SETTINGS
Input settings interface, you can choose the sensitivity of 0.775,1.0,1.414VRMS Router parameter, you can
select one of the 4ch input or multiple mix output, you can choose the signal generator. Signal generator,
you can choose a sine wave or white noise, gain -80 ~ 0dB, sine wave frequency range 20 ~ 20K
The Dynamic Bass Boost block provides boost
that varies with input-signal level: lower levels
require, and receive, more bass than higher levels.
Using a variable-Q lter, this block dynamically ad-
justs the amount of boost. The lter calculates its
bass boost between the Threshold and the Min(i-
mum) Gain settings. A xed maximum is applied
to inputs above minimum gain and below thresh-
old. Seven parameters, described below, control
this block's performance. Enter their values in
the appropriate eld or use the arrows. While it
is important for you to know how these param-
eters work and precisely what they do, nothing
surpasses playing with each one and getting a
feel for how it aects, singly and in combination,
the sound you are trying to achieve.
Dynamic bass enhancement
English version
To Next Page
Loading...
Need help?
General
