Audiovox CDM 8900 - Voice Recognition Mode; Name; Voice Tools Menu; Voice Memo

C
H
5
91
VOICE TOOLS MENU
C
H
5
90
VOICE RECOGNITION MODE
NAME
Voice Recognition (VR) enables you to place calls using your voice
and to record voice memos.
1
Press and hold until your phone turns to
Voice Recognition mode.
2
The display to the right will appear when the
phone turns on Voice Recognition mode.
1
Press and hold until your phone turns to
Voice Recognition mode.
2
If you say a name or tag that is already in the
phone book, the number and name will be
displayed and you will hear “Calling (name)”.
1
Press [MENU] to start Tools menu.
2
To enter a voice memo, press .
3
1.1. To record a voice memo, press .
Instructions will be displayed and you will
hear “Please record at the tone”.
1.2. To stop recording a memo, press [STOP]
or [PAUSE].
1.3. Press [MENU], after recording a voice
memo you can “Review” or “Re-record”.
1.4. Press [SAVE] and you can input a “Voice
Memo” title, press [OK].
(Please refer to page 31 for more detatils on
entering letters, numbers & symbols.)
2. To play voice memos, press .
Highlight the message you want to play then
press [PLAY] or press [ERASE].
3. To play speaker mode, press .
Highlight the message you want to play then
press [PLAY] or press [ERASE].
4. To erase all voice memos, press .
“Erase all voice memos?” will be displayed.
Press [OK] to erase all voice memo.
VOICE MEMO
Voice Memo allows you to record a reminder message that can be up
to 60 seconds. To record a memo: