Audiovox CDM 8900 - Voice Dial; Train Words; Yes; Undo Train All

C
H
5
93
VOICE TOOLS MENU
C
H
5
92
VOICE TOOLS MENU
VOICE DIAL TRAIN WORDS
2
To train with a word, follow the voice prompts.
Use “Yes” to train or untrain the Voice Recognition with the control
words, “Yes”.
Train allows you to use Control words to make a call without using
the keypad.
YES
1
Press [MENU] .
2
To train with a word, follow the voice prompts.
Use “No” to train or untrain the Voice Recognition with the control
words, “No”.
NO
1
Press [MENU] .
1
Press [MENU] to start Voice Tools menu.
2
To enter a voice dial, press .
3
1.1. To record a voice dial, press .
Instructions will be displayed and you will
hear “Name Please”.
1.2. To recording name, and Instructions will be
displayed.
1.3. Enter a “Voice Dial Phone Number”,
press [OK].
Press [PAUSE] to insert “Hard Pause” or
“Timed Pause”.
2. To play voice dial, press .
Highlight the message you want to play then
press [PLAY] or press [ERASE].
3. To play speaker mode, press .
Highlight the message you want to play then
press [PLAY] or press [ERASE].
4. To erase all voice dial, press .
“Removing all voice tags Proceed?” will be
displayed.
Press [OK] to erase all voice dial.
WAKE-UP
1
Press [MENU] . And you will see
“Undo voice recognition for all procedures?”.
UNDO TRAIN ALL
2
Select “OK” or “Cancel” with the [OK] or
[CANCEL].
Press [MENU] .
1
Use Wake-Up to train or untrain the Voice Recognition with the control
word, wake up.
2
To train with a word, follow the voice prompts.