Audiovox D9121ESK User Manual

7
VEHICLE INSTALLATION
To install the players to the back seat of a car:
1. Raise the headrest to get access to the headrest posts.
2. Clamp front bracket (A) and rear bracket (B) around the headrest posts.
3. Insert the four screws (C) in four places and evenly tighten the screws.
4. Install the player, at the attachment points, on to the hooks (E) on the mounting plate (F).
5. Slide the quick disconnect bracket (D) and DVD player into the rear bracket (B). Make sure it
is locked into the bracket.
6. Rotate the player to the desired viewing position and tighten the knob.
To remove the player:
1. Press the buttons on both sides of the quick disconnect bracket (D).
2. At the same time, pull the quick disconnect bracket (D) out of the rear bracket (B).
Attachment Points
Back of Player
A
B
C
D
F
E
E

Audiovox D9121ESK Specifications

General

Brand	Audiovox
Model	D9121ESK
Category	Portable DVD Player
Language	English