Need help?Do you have a question about the Audix Compact and is the answer not in the manual?
Diagram showing the front panel layout of the Compact Amplifier, identifying controls and connectors.
Diagram illustrating the Compact microphone unit, including zone selection and call button.
Details on rear panel connectors for microphone inputs and call zone signaling.
Illustration of terminals for battery backup and volume restoration connections.
Diagrams showing loudspeaker zone outputs and line output configurations.
Details on microphone installation, cabling requirements, and wiring for the Compact amplifier.
Explains connections for battery backup and volume restoration features.
Describes how volume controls in speakers bypass on live broadcast and restore tapped volume.
Guidance on connecting speakers and ensuring total load does not exceed rated output power.
Details the default configuration of the COMPACT amplifier upon delivery.
Explains the interface for navigating and operating the amplifier's menu system.
Steps to enter the menu system and navigate through various operational settings.
How to use the COMPACT microphone, including zone selection and call button functions.
Details the default configuration of the COMPACT, including zones, power, and input settings.
Instructions for changing the system configuration using jumper links on the PCB.
How to configure the three inputs as microphone or line inputs.
How to configure the output for dual-channel (2x60W) or single-channel (120W) operation.
How to configure music routing to specific zones and set output impedance.
Describes line-level output configuration for external amplifiers.
Overview of the versatile features and functionalities of the Compact amplifier.
Detailed technical data including rated power, frequency response, distortion, and sensitivity.
Purchaser's responsibility for storage and procedures for handling damage during transit.
Company's liability for defects is limited to repair or replacement within a specified period.
Notes on environmental impact on defects, title of goods, and governing laws.
Schematic illustrating the internal signal flow for the 2x60W dual-channel amplifier setup.
Schematic illustrating the internal signal flow for the 120W single-channel amplifier setup.
To Next Page
General