589.8.2. Limit switching: check
589.8.3. Reference operation position feedback: perform
589.9. Mechanical position indicator: set
599.10. Switch compartment: close
6010. Commissioning (optional equipment settings)...................................................................
6010.1. EWG 01.1 electronic position transmitter
6110.1.1. Measuring range: set
6110.1.2. Current values : adjust
6210.1.3. LED end position signalling: switch on/off
6210.2. Potentiometer
6210.2.1. Potentiometer: set
6310.3. RWG electronic position transmitter
6310.3.1. Measuring range: set
6511. Corrective action....................................................................................................................
6511.1. Faults during commissioning
6511.2. Fault indications and warning indications
7011.3. Fuses
7011.3.1. Fuses within the actuator controls
7011.3.2. Fuse replacement
7011.3.2.1. Replace fuses F1/F2.
7111.3.2.2. Test/replace fuses F3/F4
7111.3.3. Motor protection (thermal monitoring)
7312. Servicing and maintenance...................................................................................................
7312.1. Preventive measures for servicing and safe operation
7312.2. Maintenance
7312.3. Disposal and recycling
7513. Technical data.........................................................................................................................
7513.1. Technical data Part-turn actuator
7813.2. Technical data Actuator controls
8414. Spare parts.............................................................................................................................
8414.1. Part-turn actuators SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2
8614.2. AC 01.2 actuator controls with SD electrical connection
8815. Certificates..............................................................................................................................
8815.1. Declaration of Incorporation and EU Declaration of Conformity
91Index........................................................................................................................................
94Addresses...............................................................................................................................
4
SQ 05.2 – SQ 14.2 / SQR 05.2 – SQR 14.2 Control unit - electromechanical
Table of contents AC 01.2 Intrusive Modbus RTU
To Next Page
Loading...
Need help?
General
