Need help?Do you have a question about the AUMA Aumatic ACExC 01.1 and is the answer not in the manual?
General| Power supply | 24 V DC |
|---|---|
| Ambient temperature range | -20°C to +60°C |
| Degree of protection | IP68 |
| Weight | Approx. 2.5 kg |
| Housing material | Aluminum |
| Communication interfaces | HART, Modbus RTU, Profibus DP |
| Control signal | 4-20 mA |
Highlights critical safety information and pictograms for safe operation.
Explains how the actuator ensures safe operation during communication interruptions.
Details the function and operation of the emergency stop button.
Introduces DeviceNet technology, its benefits, and standards.
Explains the network structure with trunk and drop lines.
Outlines the producer-consumer model and communication types.
Covers mains connection, plug/socket connectors, and wiring details.
Describes how to connect the DeviceNet bus cable to the unit.
Details electrical connections for hazardous area applications.
Specifies DeviceNet cable requirements and specifications.
Guides on configuring network address and communication speed.
Outlines the process of setting up and integrating the AUMATIC with DeviceNet.
Describes input and output data structures for I/O communication.
Explains how to control actuator movement via command bits.
Describes the function and operation of the positioner.
Explains the meaning of status LEDs on the DeviceNet interface.
Lists diagnostic information for DeviceNet interface status.
Provides a flowchart to diagnose communication issues.
Information on obtaining the Electronic Data Sheet for configuration.
Includes the main wiring diagram for system integration.
Offers example wiring configurations for external sensors.
To Next Page