Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting ) of actuator controls ACExC 01.2 Parallel
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
51.2. Range of application
61.3. Warnings and notes
71.4. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
122.2. Short description
143. Transport, storage and packaging........................................................................................
143.1. Transport
153.2. Storage
163.3. Packaging
174. Assembly................................................................................................................................
174.1. Mounting position
174.2. Handwheel fitting
174.3. Part-turn actuator to valve: mount
184.3.1. Output drive for coupling
184.3.1.1. Part-turn actuator (with coupling): mount to valve
214.4. Mounting positions of local controls
214.4.1. Mounting positions: modify
225. Electrical connection.............................................................................................................
225.1. Basic information
245.2. KP/KPH electrical connection
255.2.1. Terminal compartment: open
265.2.2. Cable connection
275.2.3. Terminal compartment: close
285.3. KES electrical connection
295.3.1. Terminal compartment: open
305.3.2. Cable connection
315.3.3. Terminal compartment: close
325.4. KT/KM electrical connection
2
SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2 Control unit - electromechanical
Table of contents ACExC 01.2 Intrusive