AUMA FQM 05.1 Operation Instructions

335.4.1. Terminal compartment: open
345.4.2. Cable connection
365.4.3. Terminal compartment: close
375.5. External earth connection
385.6. Accessories for electrical connection
385.6.1. Actuator controls on wall bracket
395.6.2. Parking frame
406. Operation................................................................................................................................
406.1. Manual operation
406.1.1. Manual operation: engage
406.1.2. Manual operation: disengage
406.2. Motor operation
406.2.1. Local actuator operation
416.2.2. Actuator operation from remote
426.3. Menu navigation via push buttons (for settings and indications)
436.3.1. Menu layout and navigation
446.4. User level, password
446.4.1. Password entry
456.4.2. Password change
456.5. Language in the display
456.5.1. Language change
477. Indications..............................................................................................................................
477.1. Indications during commissioning
477.2. Indications in the display
487.2.1. Feedback indications from actuator and valve
507.2.2. Status indications according to AUMA classification
517.2.3. Status indications according to NAMUR recommendation
537.3. Indication lights of local controls
547.4. Mechanical position indication via indicator mark
558. Signals (output signals).........................................................................................................
558.1. Status signals via output contacts (digital outputs)
558.1.1. Assignment of outputs
558.1.2. Coding the outputs
558.2. Analogue signals (analogue outputs)
569. Commissioning (basic settings)...........................................................................................
569.1. End stops in part-turn actuator
579.1.1. End stop CLOSED: set
579.1.2. End stop OPEN: set
589.2. Type of seating: set
599.3. Switch compartment: open
609.4. Torque switching: set
619.5. Limit switching: set
619.5.1. End position CLOSED (black section): set
619.5.2. End position OPEN (white section): set
629.6. Intermediate positions: set
629.6.1. Running direction CLOSE (black section): set
639.6.2. Running direction OPEN (white section): set
639.7. Test run
639.7.1. Direction of rotation at mechanical position indicator: check
3
SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2 Control unit - electromechanical
ACExC 01.2 Intrusive Table of contents

AUMA FQM 05.1 Specifications

General

Brand	AUMA
Model	FQM 05.1
Category	Controller
Language	English