AUMA PROFOX PF-M25(X) - Page 3

304.2.5.
Positioner
374.2.6.
Speed functions
384.2.6.1.
Speed reduction
384.2.6.2.
Speed adaptation prior to end position
394.2.6.3.
Soft start and soft stop
404.2.6.4.
Speed setpoint
424.2.7.
Intermediate positions
424.2.7.1.
Pivot points
434.2.7.2.
Signal behaviour
434.2.7.3.
Hysteresis
444.2.8.
Failure behaviour
474.2.9.
Timer function
484.2.10.
EMERGENCY behaviour
524.2.11.
Duty type monitoring
524.2.12.
I/O interface
534.2.12.1.
Digital inputs
554.2.12.2.
Analogue inputs
564.2.12.3.
Digital outputs
594.2.12.4.
Analogue outputs
614.2.13. Fieldbus
614.2.13.1.
Profibus
634.2.13.2.
Modbus
654.2.13.3. Combination of fieldbus interface and I/O interface
664.2.13.4.
Auto change-over I/O
674.2.14.
Switchgear
674.2.15.
Monitoring functions
674.2.15.1.
Voltage monitoring
684.2.15.2.
Battery monitoring
684.2.15.3.
Temperature monitoring
684.2.15.4.
Torque warning
684.2.15.5.
Motion detector
694.2.15.6.
Reaction monitoring
704.2.15.7.
Operating time monitoring
714.2.16.
Bluetooth interface
734.2.17.
Service interface
744.2.18.
Configuration of signals
804.2.19.
Application functions
804.2.19.1.
Enabling
804.2.19.2.
Activation
814.3.
Device ID
824.4.
Service functions
835. Corrective actions..................................................................................................................
835.1. Faults during commissioning
835.2. Fault indications and warning indications
865.3. Not ready REMOTE
876. Thermal fuse...........................................................................................................................
90Index........................................................................................................................................
92Parameter index.....................................................................................................................
3
PROFOX actuators
Table of contents