Need help?Do you have a question about the AUMA PROFOX PF-Q150 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Manufacturer | AUMA |
| Input Voltage | 24 V DC |
| Category | Controller |
| Operating Temperature | -20°C to +60°C |
| Communication Interface | Modbus |
Details standards, staff qualifications, commissioning, operation, protective measures, and maintenance procedures.
Provides detailed steps for mounting the actuator to the valve, including coupling, grease application, and end position recommendations.
Covers general safety, operation modes, wiring diagrams, network compatibility, and power requirements.
Details instructions for connecting mains, signal, and PE cables, including arrangement and safety.
Explains end stop function and provides steps to set CLOSED and OPEN end stops.
Guides setting end positions using push buttons, covering limit and torque seating types.
Provides steps to set the CLOSED end stop, including necessary torque values.
Provides steps to set the OPEN end stop, including necessary torque values.
Details steps to set CLOSED end position using push buttons and LED indication.
Details steps to set OPEN end position using push buttons and LED indication.
Introduces parameter configuration using software and details user levels.
Explains how to set motor and actuator speed using percentage values.
Details speed settings for various functions, variable speeds, and provides example values.
Details motor operation via push buttons and AUMA Assistant App/CDT.
Details push button functions, risks of passing end positions, and LED indications.
Explains interpretation of fault/warning signals and how to check them via software.
To Next Page
