Need help?Do you have a question about the AUMA PROFOX PF-Q300 and is the answer not in the manual?
General| Torque range | 300 Nm |
|---|---|
| Control | Modulating |
| Input voltage | 24 V DC / 230 V AC |
| Protection class | IP67 |
| Ambient temperature range | -40 °C to +70 °C |
| Mounting | ISO 5211 |
General requirements for safe installation, operation, and maintenance.
Explains hazard symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Covers coupling variants and the process of attaching the actuator to the valve.
Covers hazards, qualified personnel, network types, and voltage matching.
Details opening the compartment, cable installation, and EMC considerations.
Guides on connecting mains, signal cables, and performing PE grounding.
Explains the importance and process of setting mechanical end stops for valve travel limits.
Guides on configuring the actuator's OPEN and CLOSED end positions using onboard buttons.
Explains how to adjust motor speed percentages using software tools.
Instructions for controlling the actuator using its integrated push buttons.
Details how to enable remote control via signals, fieldbus, or software.
Identifies common issues encountered during initial setup and their remedies.
Emphasizes qualified personnel and performing tasks only when the device is off.
To Next Page
