Need help?Do you have a question about the AUMA SA 60 and is the answer not in the manual?
General| Brand | AUMA |
|---|---|
| Model | SA 60 |
| Category | Controller |
| Language | English |
Enables actuator shut-off at defined valve positions using counter gears.
Switches actuator at preset torque and indicates running status.
Convert mechanical parameters into electrical signals for actuator control.
Standard 3-phase induction motors, class F insulated, IP68 protected.
Thermo switches or PTC thermistors protect motor from overheating.
Provides mechanical or remote indication of valve position.
SAR actuators operate in closed loop, starting/stopping to correct deviations.
Explains the control loop and signal flow for regulating duty.
Three-level positioner comparing signals to control actuator via relays.
Simpler version of Integral Starter Unit with selector switch and push buttons.
Features integrated controls, reducing external wiring and installation costs.
Details screw terminals, plug sockets, and specific connections for integral starter versions.
Combinations with Worm, Bevel, and Lever Gear boxes for extended torque/speed ranges.
Conforms to IP67 and available with improved IP68 enclosure protection.
Actuators designed for potentially hazardous or explosive areas, certified for group II gases.
Specifies operating temperature ranges for different actuator types.
To Next Page
